Two types of wide tread spacers are available for CIVIC FL5: PCD120 and PCD114.3. Two types are available: OEM PCD120-5H 17mm thick and PCD120 to 114.3. All are specially designed for an excellent fit, and the wheel side hub center is machined as a single unit to improve reliability and safety. The material is high-hardness duralumin (A2017S), making it a reliable domestic product. In addition, it is hard anodized to improve corrosion resistance and durability, achieving a surface hardness equivalent to that of steel.
This product was specially designed and manufactured for the FL5 and FK8 by a famous domestic spacer manufacturer. Unlike the spacers made in Southeast Asia that are sold online by many manufacturers at low prices, this product is made entirely in Japan, from raw materials to manufacturing. Although it is expensive, it is a product that is used by many users in many car models, even under harsh circuit conditions. Therefore, you can use it with confidence on the FL5 FK8.
CIVIC FL5 Wide Tread Spacer/PCD120 or 114.3Convert
This is a wide tread spacer exclusively for FL5.
There are two types available: genuine PCD120-5H 17mm thickness and PCD120 to 114.3-5H 17mm thickness conversion. PCD120 and 114.3 allow for a wider range of wheel choices.
¥44,000 Tax excluded
|
Wide tread spacer PCD120 |
The OEM PCD is 120-5H, 17mm thick. All are specially designed for an excellent fit, and the wheel side hub center is machined as a single piece to improve reliability and safety. The material is high-hardness duralumin (A2017S), and it is a reliable product made entirely in Japan. In addition, it is hard anodized to improve corrosion resistance and durability, achieving a surface hardness equivalent to that of steel. |
|---|---|
|
Converted to wide tread spacer PCD114.3 |
It can convert from the genuine PCD120 to PCD114.3. All are specially designed for a perfect fit, and the wheel side hub center is machined as a single piece to improve reliability and safety. Made entirely in Japan using high-hardness duralumin (A2017S). |
■This is a PCD conversion wide tread spacer designed specifically for FL5.
■Spacer thickness is 17mm, and there are two types: a PCD conversion spacer from 120 to 114.3 and a 120PCD spacer.
■ This is a set of two, one for each side.
■The spacer thickness is 17mm, so be sure to measure the width plus 17mm on the user's actual vehicle and check the position from the fender.
■The wheel size, tire size, vehicle height, camber angle, etc. will vary depending on the individual vehicle, including the left and right sides, so please use your own judgment to determine whether it will fit within the fender.