In order to keep the EP3's front suspension geometry at an appropriate level, we recommend using a compliance pillow ball to eliminate the extreme deformation caused by weight, which is a weakness of rubber bushings. In addition, by offsetting the front lower arm, the caster angle is increased by 3.8 degrees, improving straight-line stability. To match the material of the genuine lower arm, we use a material that corresponds to the change in the metal expansion rate of the pillow ball mount, and it responds to changes during press-in and over many years of use. Installation requires press-in work using a press machine, so please ask a professional shop to do it.
CIVIC EP3 Compliance Pillow Mount
¥36,000 Tax excluded
■Must be used at the same time as lower arm pillow (00805-EP3-F002).
■ Lower arm offset value, caster angle approx. 3.8° (measured value)
■Installation requires a mechanic with specialized knowledge or installation at a specialized factory.
■Installation requires pressing using a press, so please ask a professional shop to do it.
■After installation, adjust the alignment.
■After installation, adjust the alignment.
■Must be used at the same time as lower arm pillow (00805-EP3-F002).