■The widened body size is an increase of 70mm on each side.
■ Suitable for CIVIC FD2/FD1. Genuine rear bumper is used.
■The material is unpainted FRP with a white gel coat finish.
■Installation requires modification of the original front and rear fenders.
■The fender is attached by drilling holes and using screws.
■To drive on public roads, you will need to notify us of structural changes to the vehicle, such as changes to width.
■The vehicle width will increase by 70 mm, so a structural change notification is required if you wish to use it on public roads.
The front turn signals must be installed at a position that is at least 350mm above the ground and no wider than 400mm.
Please note that this will vary depending on the height of your vehicle. Please contact your local Land Transport Office for information on turn signal size, etc.
■Included parts include stainless steel hex button screws, bolts and nuts, stainless steel blind nuts (a special tool called a nut nut is required separately), and instruction manual.
■Illegal counterfeit products are being sold. Counterfeit products are sold and manufactured without our permission. They are inferior products that are far inferior to the original in terms of quality and performance. Please be careful not to purchase illegal counterfeit products. We recommend purchasing from authorized dealers linked to the M&M HONDA website. Counterfeit products do not have the M&M HONDA logo mark, and the logo mark is not written on the instruction manual or packaging box. We cannot provide support for the product, so please be sure to check when purchasing.