CIVIC FD2 Rear Towing Hook

CIVIC FD2 Rear Towing Hook
CIVIC FD2 Rear Towing Hook

This is a retractable tow hook for the FD2. It fits the genuine bumper. Since it is retractable, it can be rotated freely and you can choose either horizontal or vertical direction.

¥32,000 Tax excluded

Quantity

SKU: N/A Categories: , ,

This is a rear tow hook exclusively for the FD2. It comes with a dedicated bracket that can be installed with a bolt-on system, so remove the bumper and use the existing bolts to secure the bracket. The ball lock joint system allows you to adjust the angle up and down and left and right with a click, and it can be folded. The tow hook can be easily removed without removing the bumper, even when driving around town or during vehicle inspections. It is strong enough to be used in JAF-certified races. This product is also very popular with dress-up users. It is available in two colors: red and yellow. The bumper is compatible with the genuine bumper. To install, you will need to drill a hole in the bumper through which the tow hook screw can pass.

The video is now available on YouTube.

Front towing hook product configuration■ Towing hook: Choose from two colors, red or yellow■ Towing bracket■ Reuse genuine mounting bolts■ Installation instructions■ Use the hex wrench to adjust the hardness of the ball lock on the bent part of the towing hook.

1. Remove the rear bumper and remove the three bumper beam mounting screws on the passenger side.
It can be easily installed by simply fastening the hook mounting stay together. The removed bolts can be reused.
2. Next, temporarily fasten the bumper and drill a round hole where the hook screws in.
3. When drilling holes, check the center of the screw of the hook mounting bracket from the back of the bumper, remove the bumper, drill a small hole in the bumper, and temporarily fix it again to check the position. Drill larger holes gradually. If you use a hole saw to drill, be sure to drill the hole at the correct angle for the hook coming out of the bumper.
4. This towing hook is for use when driving on a circuit. Do not use it to tow a vehicle on public roads.
5. Check the installation status regularly and check for looseness, etc.
6. When driving on public roads, remove only the tow hooks.
■Do not apply sudden force when using.
■Please use when the tires are moving.
■When towing, try not to pull at an angle and pull as vertically as possible.
■To install, you will need to remove the bumper and drill a round hole.

Add a review

Welcome to WordPress. This is your first post. Edit or delete it, then start writing! All fields are required.

Related Items