This is a large-capacity turbocharger kit. Using a big turbine made by Mitsubishi Heavy Industries Engine & Turbocharger Co., Ltd. (MHI), we have maximized the power output and torque rise at high revolutions without sacrificing low and medium speeds. Installation is as simple as bolting on as the OEM. The optimization and large capacity of the compressor wheel and turbine blades contribute to improved accelerator response.
CIVIC FL5 Big Turbocharger Kit/Engine
Products not eligible for coupons
■We recommend that you have the installation and replacement done by a knowledgeable specialist store.
■After replacement, a break-in period of approximately 100 km is required.
■Replace the air cleaner with a new one.
■This will be a genuine turbine replacement.
■Since it is a big turbine, it is necessary to install a fuel system upgrade kit at the same time and set it with HONDATA FlashPro.
■It is recommended that you install a reinforced twin clutch set.
¥350,000 Tax excluded
Large capacity turbocharger kit specifications (comparison with genuine turbine)
■Changes from the original: The compressor wheel and turbine wheel have been changed to larger versions to increase flow rate.
■Comparison with the original Compressor wheel inlet diameter: upgraded from 49.3mm to 51.6mm Compressor wheel outer diameter: upgraded from 58mm to 65mm Turbine wheel outlet diameter: upgraded from 41.23mm to 47.7mm Turbine wheel outer diameter: upgraded from 47mm to 52mm
■Comparison of engine output: Original 320PS/6500rpm to 450PS/6500rpm (target)
■ Changes to the turbine structure
Number of C-wings: Changed from 12 to 10
Number of T-blade: Changed from 11 to 9. Part of the casting mold for the turbine housing was newly manufactured.
We recommend that you have the parts installed at a specialist store. After installation, you will need to run them for about 100km.
Replace the air cleaner with a new one.
This will be a genuine turbine replacement.
Because it is a big turbine, it requires the simultaneous installation of a fuel system upgrade kit and setting with HONDATA FlashPro.
It is also advisable to install a reinforced twin clutch set.