S660 JW5 Adjustable Reinforced Actuator Version II/Engine

S660 JW5 Adjustable Reinforced Actuator Version II/Engine
S660 JW5 Adjustable Reinforced Actuator Version II/Engine

Since this is a competition part, it may damage the engine. Installation and replacement at a knowledgeable specialist store is recommended. The initial setting of the actuator is set to 0.8 kgf/cm3 for a single boost, but be sure to check with a boost gauge. One thing to note about installation is that you only need to remove and replace the original actuator, but the working space is small, so care must be taken when installing. The supercharging is adjusted with a turnbuckle, but the arm of the turnbuckle is angled, so adjust it while maintaining that angle. If the installation angle is changed, the actuator will become sluggish and will no longer function. Caution: Beware of imitation products.

¥24,000 Tax excluded

Quantity

SKU: 00009-JW5-M002 Categories: ,

Introducing the new adjustable reinforced actuator version II.
For users who boost up using the factory computer or computer tuning, this is an upgraded product for the most important part that is the basis of turbo tuning.
It provides a fast boost rise without loss at the start of the boost, provides a stable boost from low to high speeds, and eliminates boost drop at high speeds. The throttle response is greatly improved.

Version II model upgrade changes:
■The rod part has been changed to stainless steel alloy. ■Strength has been improved from the previous model. ■Improved rust prevention measures ■Changed the shape of the wastegate mounting part (for easier installation)

It is introduced on Ameblo's "M&M HONDA's Honda Honki."
https://ameblo.jp/mandm-honda/entry-12780688862.html

The stable boost supply allows for smooth acceleration.
This is for all S660 users with standard boost or boost up.

It provides a fast, loss-free boost start, stable boost from low to high speeds, and eliminates boost drop at high speeds.
The throttle response is greatly improved.
The internal structure has been reinforced and there is also a turnbuckle-type boost pressure adjustment function, which aims to improve the performance stability of the standard turbo.
The reinforced actuator can maintain a stable boost pressure, preventing unstable boost pressure that can cause boost fluctuations.

By adding a reinforced actuator to a standard computer or computer tuning, you can get a stable boost from low to high RPMs, making it the best tuning item in terms of cost performance.

□How to adjust: Adjust the boost pressure by changing the length of the actuator turnbuckle.
Reducing the turnbuckle length will increase boost.
Since there are individual differences, it is necessary to check with a meter.
Please note that if you use the stock ECU, fuel will be cut off if the boost is increased too much.
To get the most out of the reinforced actuator, be sure to adjust the boost.

□ Installation precautions Do not adjust the length of the turnbuckle before installation!
Temporarily attach it from the shaft side of the turbine, then install it while pulling the actuator body.

To check the boost, you need to adjust the boost meter.

Since these are competition parts, there is a possibility of damaging the engine, so we recommend that you have them installed by a knowledgeable specialist store.

Please be careful of similar products.

Add a review

Welcome to WordPress. This is your first post. Edit or delete it, then start writing! All fields are required.

Related Items